Casio PRIVIA PX-S1100WE User Manual page 47

Configuring Settings
This setting:
Panel Lock
While this setting is enabled, the LEDs of all touch buttons, except
3 FUNCTION, are turned off, and all operations are disabled at all
times, except for those below. While Auto is selected for this setting,
operations are disabled during performances only.*
• 1P (Power) button power operations. Turning off Digital Piano
power cancels panel lock.
• Touch button operation to cancel Panel Lock.
*1 The settings below are not retained even if Auto Resume is enabled.
Duet Mode setting, song playback part setting, Local Control, Panel Lock (on only)
*2 Pressing any key or pedal is interpreted as the start of a performance and causes operation to be locked.
■ To change the panel light setting
1.
Hold down 3 FUNCTION.
• Do not release 3 FUNCTION until step 3, below.
2.
Press the G7 keyboard key.
Each time the G7 keyboard key is pressed to change this setting, a notification tone sounds to indicate the newly selected
setting.
Notification Tone*
Off tone
Option tone × 1
Option tone × 2
Option tone × 3
Option tone × 4
* For more information, see
3.
After the setting is the way you want, release 3 FUNCTION.
• Turning on the Digital Piano under battery power only (without AC adaptor power) will cause the Panel Light Setting to change
automatically to 60 seconds to conserve power. You can change the Panel Light Setting if you want.
EN-46
2
Setting
Off
5 seconds
30 seconds
60 seconds
120 seconds
"Notification Tones" (page EN-10).
Pressing
this key:
C8
Touch button lights remain lit.
After non-operation of the front panel for the specified time, the lights
of all touch buttons, except for 3 FUNCTION, will turn off.
Does this:
Cycles between off, on and auto. Even
after selecting ON for this setting, you can
change the setting by holding down
3 FUNCTION and pressing the C8
keyboard key.
Off: Off tone
On: Option tone × 1
Auto: Option tone × 2
Description