Digital Piano Operations; Listening To Demo Play; Selecting A Tone; Selecting A Single Tone - Casio PRIVIA PX-S1100WE User Manual

Digital Piano Operations

Listening to Demo Play

1.
Hold down 3 FUNCTION.
This causes the DEMO light to flash, and the
4 SOUND MODE light to turn light (and the lights of
other buttons to turn off).
2.
Touch 4 SOUND MODE.
This will cause the 6 a and DEMO lights to light,
and starts playback of the one demo song (and the lights
of buttons except for 6 a to turn off). After demo
song playback is complete, it will continue with playback
of Music Library (page EN-25) songs.
• The operations below are supported during demo play.
A0 C1 C2 C3
B0
B 0 C1 - A1
To do this:
Skip forward to the next
song
Skip back to the previous
song
Jump to a specific song
Jump to a song by inputting
its number
Return to the first song
(demo song)
• For information about how to input song numbers and
the keyboard keys you should use for input, see
"Inputting Song Numbers Using the Song Selection
Keyboard Keys (10-key)" (page EN-10). For a list of
songs, see the "Music Library
3.
To stop demo song playback, touch 6 a.
This causes the button lights that turned off in the above
procedure to light again.
• If Auto Power Off is enabled, power will turn off
automatically after the prescribed time even during demo
song play. To avoid this, you can use the procedure under
"To enable or disable Auto Power
disable Auto Power Off.
C4 C5 C6 C7
C2 - B6
Perform this operation:
While holding down 6 a,
press the B0 keyboard key.
While holding down 6 a,
press the B}0 keyboard key.
While holding down 6 a,
press a keyboard key from C2
through B6.
While holding down 6 a,
input a song number (0 to 60)
by pressing a keyboard key
within the range of C1 through
A1.
While holding down 6 a,
press the B}0 and B0
keyboard keys at the same
time.
List" (page EN-57).
Off" (page EN-7) to

Selecting a Tone

Your Digital Piano comes with 17 tones, including three grand
piano tones that are assigned to the entire keyboard range,
plus one bass tone that can be assigned to lower range only.
In addition to assigning a single tone to the keyboard, you can
also layer two different tones and you can split the left side
and right side of the keyboard between tones.

Selecting a Single Tone

■ To select a tone using keyboard keys
1.
While holding down 8 GRAND PIANO, press
a keyboard key from A0 through C{2.
A0 C1 C2
A0 - C 2
C8
• For example, pressing the F{1 keyboard key will
select the HARPSICHORD tone and will sound the
confirmation tone using the HARPSICHORD tone.
• For information about the tone assigned to each
keyboard key, see
2.
Release 8 GRAND PIANO.
■ To select a tone with the touch buttons
Touching 8 GRAND PIANO selects the GRAND PIANO
CONCERT tone.
• If tones are currently layered (page EN-12) or if the
keyboard is split between two tones (page EN-13),
performing the above procedure to select a tones will
cancel the layer and split settings.
■ Grand Piano Tones
The characteristics of each of the three grand piano tones are
described in the table below.
Tone name
CONCERT
BRIGHT
MELLOW
C3 C4 C5 C6
"Tone List" (page EN-56).
Description
A full concert grand piano tone for
dynamic and natural tone changes.
A bright and clear piano sound.
A warm, subdued piano tone.
C7 C8
EN-11