Other Settings - Casio PRIVIA PX-S1100WE User Manual

Other Settings

To change settings shown in the table below, hold down 3 FUNCTION as you press the indicated keyboard keys.
A0
This setting:
Touch Button Luminosity
Toggles the touch button luminosity setting between 1 (dim) and
2 (bright).
Touch Button Sensitivity
Specifies touch button sensitivity within the range of –1 (Low) to
0 (Standard) to +1 (High).
Speaker Out
When Auto is selected for this setting, no sound is output from the
Digital Piano speakers when something is plugged into the
9 PHONES jack (default). Regardless of whether something is
plugged into the 9 PHONES jack, enabling this setting causes sound
to be output from the speakers. Sound is not output from the speakers
when this setting is disabled.
Power On Alert
Enables or disables Power On Alert (page EN-7).
Panel Light Setting
To save power, you can configure a setting that will turn off all button
lights, except for 3 FUNCTION, after a certain period of non-
operation. You can specify a trigger time of 5, 30, 60, or 120 seconds.
You can also disable this setting, which means that lights will remain
on.
Auto Resume
Enabling Auto Resume causes most settings to be saved while power
is turned off.* 1
Notification Tone Volume
The notification tone volume can be adjusted within the range of
0 (muted) to 10 (maximum).
Notification Tone Set Selection
Your Digital Piano lets you know the results of operations by sounding
notification tones. You can select from among three different notification
tone sets.
C1 C2 C3 C4 C5
D7: Touch Button Luminosity dim/bright
E}7: Touch Button Sensitivity (–)
E7: Touch Button Sensitivity (+)
F7: Speaker Out disable/enable/Auto
F{7: Power On Alert
G7: Panel Light Setting
A}7: Auto Resume
A7: Notification Tone Volume (–)
B}7: Notification Tone Volume (+)
B7: Notification Tone Set Selection
C8: Panel Lock disable/enable/Auto
Pressing
this key:
D7
E}7
E7
F7
F{7
G7
A}7
A7
B}7
A7 + B}7
B7
Configuring Settings
C6 C7 C8
Does this:
Toggles the setting between 1 and 2.
Lowers the touch button sensitivity setting
by 1.
Raises the touch button sensitivity setting
by 1.
Cycles between off, on and auto.
Off: Off tone
On: Option tone × 1
Auto: Option tone × 2
Toggles between enabled and disabled.
See "To change the panel light
(page EN-46).
Toggles between enabled and disabled.
Lowers the notification tone volume by 1.
Raises the notification tone volume by 1.
Returns the notification tone volume to its
initial default setting.
Cycles the setting to the next notification
tone set (1, 2, 3).
setting"
EN-45