Casio PRIVIA PX-S1100WE User Manual page 30

■ To record the left-hand part track
1.
Depending on the track to be recorded,
configure the applicable settings.
• See "Recorded MIDI
• If you want to specify a beat and tempo setting, refer to
the information below and configure the settings.
"To change the metronome
"Specifying the Tempo" (page EN-22)
2.
While the 70 (REC) button is lit white, touch
70 (REC).
This enters record standby, which is indicated by flashing
70 (REC) (red) and 6 a (white) lights.
• At this time, the "L" indicator starts to flash. This
indicates that the left-hand part track will be recorded.
• To exit a recording operation here, touch 70 (REC).
This makes 70 (REC) light white again.
3.
If you want the metronome to sound during
recording, touch 5 METRONOME.
4.
To start recording, play something on the
keyboard, press the pedal or touch 6 a.
This causes the 70 (REC) light (red) to change from
flashing to lit.
5.
When you are finished recording, touch 70
(REC) or 6 a.
This makes 70 (REC) light white again.
6.
To replay the recording, touch 6 a.
Restarting Recording From the Beginning
• If you make a mistake and want to stop an ongoing
recording operation and restart recording from the
beginning, hold down 70 (REC) until its light flashes.
This discards everything you have recorded to the left-hand
track and returns to record standby. Perform the operation
from step 4 of the above procedure to restart recording.
Data" (page EN-27).
beat" (page EN-21)
■ To overdub a left-hand part track recording with
right-hand part track recording
1.
Perform steps 1 and 2 under
left-hand part track" (page EN-29).
2.
Press 70 (REC) as many times as necessary
until the "R" and "L" indicators are as
described below.
• "R" indicator flashing. This indicates that the right-hand
part track will be recorded.
• The "L" indicator stops flashing. This indicates that the
left-hand part track recording is complete.
3.
As required, specify whether or not you want
to play back the left-hand track while
recording.
(1) While holding down 6 a, press keyboard key A0
(leftmost white key).
Each press of the A0 keyboard key toggles the "L"
indicator between lit and unlit.
L lit: Left-hand part track playback during recording.
L unlit: No left-hand part track playback during
recording.
(2) Release 6 a.
4.
If you want the metronome to sound during
recording, touch 5 METRONOME.
5.
To start recording, play something on the
keyboard, press the pedal or touch 6 a.
This causes the 70 (REC) light (red) to change from
flashing to lit.
• The settings configured for the left-hand part track are
applied for the beat and tempo.
6.
Perform the procedure starting from step 5
under "To record the left-hand part
(page EN-29).
Restarting Overdubbing From the Beginning
• If you make a mistake and want to stop an ongoing
overdubbing operation and restart overdubbing from the
beginning, hold down 70 (REC) until its light flashes.
This discards everything you have recorded to the right-
hand track and returns to record standby. Perform the
operation from step 5 of the above procedure to restart
overdubbing.
Digital Piano Operations
"To record the
track"
EN-29