4: Installing 2-Wire Smoke Detectors - Honeywell Farenhyt RPS-1000 Installation And Operation Manual

Flexputs™ I/O Circuits
3.5.4 Installing 2-Wire Smoke Detectors
Any compatible UL listed two-wire smoke detector can be used with the RPS-1000 panel (see "Compatible Devices" on page 1 for list
of compatible smoke detectors). Figure 3.12 and Figure 3.13 illustrate how to connect a UL listed 2-wire detector to the control panel.

Class B Installation
To install a Class B two-wire smoke detector, wire as shown in Figure 3.12.

2-Wire Class A Smoke Detector Installation
To install a Class A two-wire smoke detector, wire as shown in Figure 3.13.
RPS-1000 / RPS-1000B Manual - P/N 151153:N 08/09/2017
Model Number
IFP-2000ECS
IFP-1000ECS
IFP-100ECS
IFP-300ECS
IFP-2100ECS
EOL
4.7 k
Figure 3.12 Two-Wire Class B Smoke Detector
Note:
I/O circuit 5 and 6
used as an example.
Any I/O point pairing
could be used.
Figure 3.13 Two-Wire Class A Smoke Detector Connections
FACP Installation Manual
151430-L8
151460
151458
LS10145-001SK-E
LS10143-001SK-E
Note:
I/O circuit 5
used as an example.
Any I/O circuit
could be used.
Hardware Installation
28