GE KTR-11 Installation Manual page 21

Table 1. KTD-304A/304RA key functions
Key Explanation
Site select keys
0–9 Used for camera and monitor selection in Digiplex operation mode, or camera and multiplexer selection in
multiplexer operation. Also used for preset position selection when applicable.
clear Refreshes alphanumeric display on the selected monitor. Also used to clear infinite alarms using numerical keys.
set Used in combination with the number keys to find preset positions. Also used with auto to engage the preset
tour mode.
Pan/tilt/zoom control keys
zoom in, Used to control the zoom function of the selected receiver site's motorized lens.
zoom out
focus near, Used to control the focus function of the selected receiver site's motorized lens. Also used to disengage the
focus far autofocus feature on the CyberDome.
iris open, Used to control the iris function of the selected receiver site's motorized lens.
iris close
joystick Used to move the selected receiver site's camera up, down, left, or right in P/T operation. Used to select views for
multiplexer operation.
auto Places the selected receiver site's pan/tilt unit in the autopan mode (camera pans left and right automatically).
Also used in combination with set to initiate the preset tour mode.
autofocus Engages autofocus mode on the CyberDome.
Video switcher control keys
mon Used in combination with the number keys (0-9) to select an active monitor.
seq Used to start selected sequence tour on active monitor.
alarm Toggles the active monitor between the alarm on and alarm off modes.
Access control keys
open, close Used to operate the selected receiver site's door, gate, or turnstile access control.
1st Used in access control applications to automatically select camera sites in the order in which they call in. This
key will function only when the keypad has been programmed for annunciation.
Special application keys
face Used to select KTR-11 Face/Badge Reader's face camera.
badge Used to select KTR-11's badge camera (or inserted badge view, if applicable).
door1, Used to select auxiliary camera views from KTR-11's video switcher circuitry.
door2
open1, Used to operate the selected receiver site's door for access control.
open2
talk Used for two-way audio communication with selected site, when applicable (KTD-304A and KTD-304RA only).
vol , vol Used to adjust audio level on KTD-304A or KTD-304RA.
17