Table of Contents
Advertisement
Removing and installing components
NOTE:
The images in this document may differ from your computer depending on the configuration you ordered.
Recommended tools
The procedures in this document may require the following tools:
● Phillips screwdriver #0
● Plastic scribe
Screw list
NOTE:
When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and
then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is
restored when the component is replaced.
NOTE:
Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surfaces when
replacing a component.
NOTE:
Screw color may vary with the configuration ordered.
Table 1. Screw list
Component
Base cover
Battery
Touchpad bracket
Routing guide for speaker cable
Touchpad
Rear cover
Rear cover
Display assembly
Screw type
M2x6
M2x4
M2x2.5
M2x4
M2x2
M2x2
M2.5x5
M2.5x4
Quantity
Screw image
4
4
3
2
2
2
2
8
Removing and installing components
NOTE:
Screw color may vary
depending on the configuration
ordered.
2
9
Advertisement
Table of Contents
