Installing The M.2 2280 Solid-State Drive - Dell G16 7620 Service Manual

Steps
1. Remove the two screws (M2x4) that secure the thermal shield to the M.2 2280 solid-state drive and the system board.
2. Lift the thermal shield off the palm-rest and keyboard assembly.
3. Slide and lift the M.2 2280 solid-state drive off the M.2 card slot on the system board.

Installing the M.2 2280 solid-state drive

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the M.2 2280 solid-state drive and provides a visual representation of the
installation procedure.
Removing and installing components 19