To confirm your selections and to implement them until
Step 5
you change them or until you restart your DMP,
click Apply.
To test if your selections are suitable ones for your
Step 6
DMP display, click Show IP in the DMP Mode area.
Your DMP display should show a Cisco logo and
should show the IP address for your DMP.
To make your configuration changes permanent, even
Step 7
after you restart your DMP, do the following:
a. Select Administration > Save Configuration.
b. On the Save Configuration page, click Save.
9
Setting Up Centralized Management
If your DMP will be managed centrally as part of a digital
signage network, you must configure DMPDM and DMM-DSM
to work together.
22