Cisco 4400G Quick Start Manual page 18

If you just completed the optional Step 4 in this
Note
procedure, that means you skipped ahead first and have
already completed the
Management" section on page 22.
completed Step 4 here, however, the changes that you
made to credentials will prevent your trusted DMM
appliance temporarily from communicating with your
DMPs. To restore proper communication, you must
now repeat Step 3 in the
Management" section on page 22.
To change the DMP Service Account password on one
Step 5
DMP by using DMPDM, select Administration > DMP
Service Account. Enter your new password in the
Password field, enter it again in the Repeat Password
field, then click Apply. Next, select Administration >
Save Configuration, then click Save.
18
"Setting Up Centralized
Now that you have
"Setting Up Centralized