• If you will connect your DMP to an analog display,
do all of the following:
Connect the other end of the cable (or cables) to the
Step 2
corresponding interface (or interfaces) on your
DMP display.
If the DMP display is not already turned on, turn it
Step 3
on now.
5
Connecting to a 100V–240V
AC Socket
Warning
Use only the supplied power cable and adapter.
Connect the DMP power cable to the AC adapter.
Step 1
Connect the DC barrel connector to the 12V DC power
Step 2
supply on the DMP chassis.
Plug one yellow jack on the RCA video cable
–
into the CVBS interface on your DMP.
Plug the 3mm jack on the RCA audio cable
–
into the AUDIO interface on your DMP.
11