Placing A Call-Additional Options - Cisco 7945G User Manual

Tips
• You can dial on-hook, without a dial tone (pre-dial). To pre-dial, enter a number, then go
off-hook by lifting the handset or by pressing Dial,
• When you pre-dial, your phone tries to anticipate the number you are dialing by displaying
matching numbers (if available) from your Placed Calls log. This is called Auto Dial. To call a
number displayed with Auto Dial, press the number, or scroll to it and go off-hook.
• If you make a mistake while dialing, press << to erase digits.
• Your phone might be set up for international call logging, which is indicated by a "+" symbol on
the call logs, redial, or call directory entries. See your system administrator for more information.
Placing a Call—Additional Options
You can place calls using special features and services that might be available on your phone. See your
system administrator for more information about these additional options.
If you want to...
Place a call while another call
is active (using a different
line)
Speed dial a number
Dial from a corporate
directory on your phone
Dial from a corporate
directory on your personal
computer using
Cisco WebDialer
Cisco Unified IP Phone 7965G and 7945G Phone Guide for Cisco Unified Communications Manager 7.0
Then...
1. Press for a new line. The first call
is automatically placed on hold.
2. Enter a number.
Do one of the following:
• Press (a speed-dial button).
• Use the Abbreviated Dial feature.
• Use the Fast Dial feature.
1. Choose > Corporate
Directory (name can vary).
2. Enter a name and press Search.
3. Highlight a listing and go off-hook.
1. Open a web browser and go to a
WebDialer-enabled corporate
directory.
2. Click the number that you want to
dial.
, or .
For more information,
see...
Using Hold and Resume,
page 25
Speed Dialing, page 39
Using Call Logs, page 57
Setting Up Phones and
Access Lists for Mobile
Connect, page 75
21