Table of Contents
Advertisement
• If parties on a call hear a beep tone, the call might be monitored or recorded. Ask your system
administrator for more information.
• If you press any digits while on an active call, the digits will be displayed on the screen and will
timeout after 2 seconds. The digits will display again if additional digits are pressed.
• If you hear a beep tone from your phone, you might be out of range of the wireless network. Move
to a location where you can see a strong signal icon
phone.
Placing a Call—Additional Options
You can place calls using special features and services that might be available on your phone. See your
system administrator for more information about these additional options.
If you want to...
Speed dial a contact number
in your local phone book
Speed dial a phone number
(for a Line View speed-dial
number set up on the web)
Place a call while another
call is active (using a
different line)
Place the call on a
secondary line
38
FCS REVIEW DRAFT - CISCO CONFIDENTIAL
Then...
Do one of the following:
• Press and hold a speed-dial hot key for
about two seconds.
Note
If dialing a two-digit number, enter the
first digit, then press and hold the
second digit for about two seconds.
• Choose
Dials, highlight a speed dial, and
press
1. Press
2. Scroll to a speed dial
3. Press
1. Press Hold.
2. Press
3. Scroll to another line and press
4. Dial a number.
5. Press
1. Press
2. Dial a number.
3. Press
on the phone if you wish to use your
(Directory)> Speed
.
.
.
or
to make the call.
.
to make the call.
and scroll to another line.
to make the call
For more information,
see...
Using the Phone Book
on Your Phone,
page 88
Speed Dialing, page 55
Speed Dialing, page 55
Using Hold and
Resume, page 42
.
Switching Between
Multiple Calls, page 44
OL-16132-01
Advertisement
Table of Contents
