Cisco 8800 Hardware Installation Manual page 13

2. Some configuration and command information is included in this guide for using the multiprotocol service module (MPSM-8-T1E1/MPSM-16-T1E1) in
a Cisco MGX 8230, MGX 8250, or MGX 8850 (PXM1) switch.
For the September 2005 product release, there are no new features for the Service Expansion Shelf (SES)
Note
of the BPX switch and BPX WAN switching software. Therefore, documentation for these items was not
updated.
Table 3
Cisco MGX 8850 (PXM1) switches. These switches use the PXM1 processor card. Although there are
new features in MGX Release 1.3 for these switches, only the release notes were updated. And the
following guides contain some information about configuring the MPSM-8-T1E1 and MPSM-16-T1E1
cards for use in these switches:
•
•
•
Table 4
Table 5
Table 4 Documents that Ship with Multiservice Switch Products
Document Title
Finding Cisco User Documentation Online
DOC-7817081=
Installation Warning Card
DOC-7812348=
Regulatory Compliance and Safety Information for Cisco
Multiservice Switch Products (MGX, BPX, and SES)
DOC-7814790=
Releases 2 - 5.2, Part Number OL-4545-01, Rev. H0, May 2006
Table 3 lists the most recent user guides and release notes for these products.
also lists the latest documentation available for the Cisco MGX 8230, Cisco MGX 8250, and
Cisco Circuit Emulation Services (CESM/MPSM-8-T1E1) Configuration Guide and Command
Reference for MGX Switches, Release 5.2
Cisco Frame Relay Services (FRSM/MPSM-8-T1E1) Configuration Guide and Command Reference
for MGX Switches, Release 5.2
Cisco ATM Services (AUSM/MPSM-8-T1E1) Configuration Guide and Command Reference for
MGX Switches, Release 5.2
lists the documents that ship with product.
contains alphabetized titles and descriptions of all the guides and release notes listed in
Description
Describes how to find the guides and release notes that support
multiservice switches and network management products.
These documents are available only online. This guide ships
with product.
Contains precautions that you should take before you
insert a card into a slot. This Warning Card ships with
product.
Provides regulatory compliance information, product
warnings, and safety recommendations for all the Cisco MGX
multiservice switches: MGX 8230, MGX 8250, MGX 8850
(PXM1), MGX 8850 (PXM45), MGX 8850 (PXM1E), MGX
8830 and MGX 8950. Also provides such information for the
MGX 8880 Media Gateway. This guide ships with product.
Cisco MGX 8800/8900 Series Hardware Installation Guide
Documentation
Table 3.
xlv