Internal Connectors - Asus H610A-IM-A Manual

2.6.2

Internal connectors

1. ATX Power connectors (24-pin ATXPWR, 2 x 4-pin EATX12V)
Correctly orient the ATX power supply plugs into these connectors and push
down firmly until the connectors completely fit.
Connector type
2. CPU and Chassis Fan headers (4-pin CPU_FAN, 4-pin CHA_FAN)
Connect the fan cables to the fan headers on the motherboard, ensuring that
the black wire of each cable matches the ground pin of the header.
B
Connector type
CAUTION: Do not forget to connect the fan cables to the fan headers.
Insufficient air flow inside the system may damage the motherboard
components. These are not jumpers! Do not place jumper caps on the fan
headers!
2-16
A
POWER CON 24P S/T
POWER CON 8P S/T
A
WAFER HD 4p, 2.54mm pitch, S/T
A
EATX12V
PIN 1
+5V Standby
Power OK
B
CPU_FAN
A
CHA_FAN2
B
GND
CHA FAN PWR
CHA FAN IN
CHA FAN PWM
CPU_FAN1
C
C
B
ATX_PWR
GND
+3 Volts
+12 Volts +5 Volts
+12 Volts +5 Volts
+5 Volts
-5 Volts
GND GND
+5 Volts GND
GND GND
+5 Volts PSON#
GND GND
+3 Volts -12 Volts
+3 Volts +3 Volts
PIN 1
H610A-IM-A