Canon ColorPASS-Z5000 Printing Manual page 66

4
4-12 Special Features
The following procedure describes scanning from Adobe Photoshop.
N :
OTE
T :
O PRESCAN A DOCUMENT
1. Launch Photoshop.
2. Place the original you want to scan on the copier glass.
3. In Photoshop's File menu, point to Import, and click Select TWAIN_32 Source
(Windows) or Fiery Twain Select (Mac OS).
4. Select Fiery Scan in the window that appears, and click Select (Windows) or OK
(Mac OS).
5. In the File menu, point to Import, and click TWAIN_32 (Windows) or Fiery Twain
Acquire (Mac OS).
6. Select the ColorPASS in the Chooser window, and click OK (Windows) or Connect
(Mac OS).
If the ColorPASS does not appear in the Windows Chooser list, you must configure
the Chooser list to communicate with the ColorPASS. For instructions, see Getting
Started.
7. Select the appropriate settings in the Fiery Scan dialog box.
—Choose the paper size of the original from the pop-up menu.
Prescan size
—Specify a value for the resolution. Changing the resolution also changes
Resolution
the image size. The maximum resolution supported by the ColorPASS appears in the
dialog box.
(
Scan Mode Full Color, Grayscale,
want.
8. Click Prescan.
The prescan image appears on the left side of the dialog box.
After prescanning, you must complete the scan before the ColorPASS is able to
N :
OTE
begin RIPping and printing any new jobs.
or )—Specify the type of scan you
Black & White