Black & Decker BXAFO1200E Manual page 7

INSTRUCTIONS FOR USE
Before use:
♦ Make sure that the entire product's packaging has been
removed.
♦ Before using the product for the first time, clean the
parts that will come into contact with food in the manner
described in the cleaning section.
♦ During first use it is normal that the appliance emits a
slight plastic odor.
♦ Prepare the appliance according to the function you wish
to use:
ACCESORIES USE:
Oil drip tray:
♦ ALWAYS place oil drip tray in the lower rails of the
cooking space (Fig.A)
♦ It can be use as baking tray. Then place it in the middels
rails of the appaliance.
Air flow rack
♦ Place the racks in the middle rails (Fig.B)
♦ NOTE: The heating element is located at the top of the
cooking place. If place the food near the heating element
the intensity of heat will be more-
♦ For crispy result place the rack on the top rail.
♦ For enven and gentel cooking place ranck on the lower
rails.
Rotisserie shaft
(Fig.C)
♦ Remove the fork from the rod by loosening the fastening
screw.
♦ Push the rod through the meat and slide it to the centre.
♦ Put the fork onto the rod again with the prongs facing
towards the meat.
♦ Chicken should be bound in a string to prevent the chick-
en legs or wings touch heating element during roasting,
so that rotisserie assemble will rotate smoothly.
♦ Slide both forks firmly against the meat and tighten the
fork fastening screws well.
♦ Place the rod with the meat into the oven.
♦ Activate the rotation button (3)
♦ After cooking loosen the fork fastening screws and
remove the meat by sliding it to the end of the rod.
(Original instructions)
Rotating basket
♦ The rotating basket can be used to fry potatoes (frozen,
natural or oven), vegetables, meat, croquettes, nuggets,
fish bars, among other frozen products.
♦ NOTE: For even cooking, DO NOT overfill the basket.
♦ Make sure the basket is tightly closed before starting the
cooking process.
♦ To place the basket in the appliance, first insert the left
side (Fig.D) and then hook the right side (Fig.E) into the
bracket.
♦ Activate the rotation button (3)
Use:
♦ Extend the cable completely before plugging it in.
♦ Connect the appliance to the mains.
♦ Open the door
♦ If you don't use the oil tray pan (H) as baking tray place
it at the bottom part of the appliance.
♦ Use the appropriate accessory according to the food you
want to cook.
♦ Prepare the food, place it in the accessory and insert it
into the appliance.
♦ Close the door
♦ Press the power button during few seconds. The screen
will activate.
♦ Then select the temperature by pressing the temperature
control button (4).
♦ Select the appropriate time by pressing the time control
button (5) for cooking or select the pre-defined program
(7) if you wish.
♦ NOTE: keep in mind that the cooking time may vary
depending on the food, quantity and size.
♦ If you use rotisserie accessory or the rotating basket,
you may select Rotation Button (3).
♦ By pressing the internal light button (2) you can check
the cooking process while the appliance is operating.
♦ If you open the door, the appliance will pause automati-
cally and the light will come on. When you close it again,
the applieance will start up again.
♦ After the selected time or once the pre-defined menu is
finished, the appliance will stop automatically and emit
a beep.
♦ To completely turn off the appliance press the power
button until the screen turns off.
♦ Open the door and remove the food.
♦ CAUTION: Always use oven gloves to protect your
hands. The metallic parts can become very hot during
use. Take care when touching the rods and the forks.
ENGLISH
7