Advertisement
Attention!
The minimum voltage at the readers input mustn't be lower then 12V.
The maximum length of the serial RS232 cable is 15m.
Step 1: After removing the Ethernet Converter "NPort5110" device server from the box, the first thing
you should do is connect the power
Step 2: Connect the Ethernet Nport 5110 device server to a network. Use a standard straight- through
Ethernet cabel to connect to a hub or switch. When setting up or testing thr Ethernet NPort5110 device
server, you might find it convenient to connect directly to your computer´s Ethernet port. In this case,
use a cross-over Ethernet cable.
Step 3: Connect the Ethernet "NPort5110" device server´s serial port to a serial device.
Step 4: Placement options tophat rail
Software Installation Information:
To install NPort Administration Suite, insert NPort Document & Software CD into your computer´s CD-Rom
driver. Once the NPort Installation CD windows opens, click on the Installation button, and the follow the
instructions on the screen.
To view detailed information about NPort Administration Suite, click on the Document button, and then se-
lect "NPort 5100 Series User´s Guide" to open the pdf version of the user´s guide.
Pin Assignment:
Ethernet Port Pinouts
Pin Number
1
2
3
6
--------------------------------------------------------------------------------5/6--------------------------------------------------------------------------------
Ethernet
Tx +
Tx -
RX +
Rx -
Advertisement
