Advertisement
Hardware Installation Information
SAB Cap
Attention!
Do not dicconnect the green SAB Cap
B
Connecting for power supply and serial port:
The reader has to be supplied with 12 to 30V DC. The maximum output power of the power supply has to
be 1.2 Watt. Be sure that you use the right polarity.
Connector Typ: Lumberg 0976 PFC 101
Power supply:
Data interface:
--------------------------------------------------------------------------------4/6--------------------------------------------------------------------------------
A
Pin1 = 12 ....30 Volt
Pin4 = GND
Pin2 = RXD (readers data input)
Pin3 =TXD (readers data output)
Pin5 = GND
1
2
Advertisement
