Installing The Battery And Memory Card; To Remove The Battery - Canon PowerShot S80 User Guide Basic User Manual

01_EC176Basic_E.fm Page 2 Tuesday, June 28, 2005 10:06 AM

Installing the Battery and Memory Card

1
Slide the memory card slot/battery cover (a) and open it (b),
and insert the battery and memory card, then close the cover.
Ensure that the memory card is correctly oriented before inserting it in the
camera. It may damage the camera if inserted incorrectly.

To Remove the Battery

Push the battery lock in the direction of the arrow and hold it while pulling
the battery out.
2
Insert the battery lock in the
direction of the arrow and hold it
while pulling the battery in.
See the Advanced Guide: Battery Handling (p. 125)
See the Advanced Guide: Handling Memory Cards (p. 127)
Back
Connector
Insert until the memory
card clicks into place