Using The Zoom; Zoom Lever - Canon PowerShot S80 User Guide Basic User Manual

01_EC176Basic_E.fm Page 12 Tuesday, June 28, 2005 10:06 AM
Some settings can be changed in each shooting mode (the Advanced
Guide: p. 160).
Results may vary depending on the subject.
In , ,
ISO speed may increase and cause noise in the image.
Observe the following precautions according to the selected function.
You can achieve a better blurring effect of the background by making sure the upper half
of your subject fills the entire LCD monitor.
You can enhance the blurring effect of the background even more by setting the lens
to its maximum telephoto setting.
The camera shake warning icon
shutter speeds are frequently used in this mode. If this happens, affix the camera to a
tripod.
The shutter speed slows down. Even if you use the flash, tell your subjects not to
move for a few moments.
If the Night Scene mode is used to shoot mid-day shots, the same effects as with the
mode can be obtained.
The slow synchro option automatically turns on. Use a tripod to avoid camera shake.
Use of Waterproof Case WP-DC1 (sold separately) is recommended.
The shutter speed is slow. Always use a tripod to avoid camera shake.
Install the camera in Waterproof Case WP-DC1 (sold separately).
Shoot with the subject 1 m (3.3 ft.) – infinity from the front of the lens.

Using the Zoom

The zoom can be adjusted from 28 – 100 mm (focal length) in 35mm film equivalent
terms.

Zoom lever

12
or mode (depending on the scene being shot), the
may appear on the LCD monitor since slower
Telephoto
Zooms in on the subject.
Wide Angle
Zooms out from the subject (the subjects will be
small).