Connecting The Camera To A Computer - Canon PowerShot S80 User Guide Basic User Manual

01_EC176Basic_E.fm Page 21 Tuesday, June 28, 2005 10:06 AM
2

Connecting the camera to a computer.

1. Use the supplied interface cable to connect the computer's USB
port to the camera's DIGITAL terminal.
Slide the camera's DIGITAL terminal cover in the direction of the
open it, and plug the interface Cable in all the way.
When the power is turned on automatically, the camera and computer
will be able to communicate.
Always grasp the connector's sides to remove the interface cable
from the camera's DIGITAL terminal.
If the Digital Signature Not Found window appears, click [Yes]. The USB
driver will automatically finish installing onto the computer when you attach
the camera and open a connection.
USB Port
DIGITAL Terminal
Interface Cable
to
Interface Cable
21