Handlebar Switches - Yamaha Xmax 250 Owner's Manual

Handlebar switches

1
2
3
4
1. Dimmer switch "jk"
2. Pass switch "PASSING"
3. Turn signal switch "cd"
4. Horn switch "a"
1 2
1. Starting switch "g"
2. Hazard switch " "
INSTRUMENT AND CONTROL FUNCTIONS
EAU12344
Pass switch "PASSING"
Press this switch to flash the head-
light.
Dimmer switch "
Set this switch to "
beam and to "
k
With the headlight on low beam,
press this switch downwards to flash
the headlight.
Turn signal switch "
To signal a right-hand turn, push this
switch to " ". To signal a left-hand
d
turn, push this switch to "
released, the switch returns to the
center position. To cancel the turn
signal lights, push the switch in after it
has returned to the center position.
Horn switch "
a
Press this switch to sound the horn.
Start switch "
g
With the sidestand up, push this
switch while applying the front or rear
EAUS1300 brake to crank the engine with the
starter.
CAUTION:
See page 5-1 for starting instruc-
EAUS1020
tions prior to starting the engine.
/ "
j k
" for the high
j
" for the low beam.
Hazard switch "
With the key in the "ON" position, set
this switch to "
hazard lighting (simultaneous flashing
of all turn signal lights). To turn off the
EAU12460
/ "
hazard lighting, set this switch to "h"
c d
and, then turn the key to "OFF".
NOTE:
". When
c
Even if the key is turned from "ON" to
"OFF" with the hazard lighting on, the
hazard lighting will continue to flash
regardless of the hazard switch posi-
tion. To cancel the hazard lighting, the
EAU12500
key must be turned to "ON" and the
"
hazard switch must be set to the "h"
position.
EAU12720
"
3-9
ECA10050
EAUM1990
3
", "h"
" to turn on the