Makita GTP01 Instruction Manual page 9

Nose adapter
CAUTION:
Always make sure that your
fingers are not placed on the switch trigger or
the contact element and the battery cartridge is
removed before installing the nose adapter.
When firing pin nails on the material with easily-marred
surfaces, use the nose adapter.
Place the nose adapter over the contact top of the driver
guide so the guide projections inside the nose adapter
well fit into the guide notches in the driver guide.
You can store the nose adapter in the holder at the back
end of the magazine to keep it from being lost.
5
Fig.11
► 1. Nose adapter 2. Driver guide 3. Guide projections
4. Guide notches 5. Holder
Nose adapter for driving on flat
surfaces
Optional accessory
Use the optional nose adapter designed for fastening
operation on flat and even surfaces. It protects the soft
surfaces of workpiece against marks and scratches to
be made by round pointed contact tops.
Fig.12
4
3
Place the optional nose adapter over the contact top
of the driver guide so the guide projections inside the
nose adapter well fit into the guide notches in the driver
guide.
3
Fig.13
► 1. Optional nose adapter 2. Driver guide 3. Guide
projections 4. Guide notches
2
Hook
1
CAUTION:
secure it with the screw firmly. If not, the hook
may come off from the tool and result in the personal
injury.
CAUTION:
for their intended purposes only. Using for unin-
tended purpose may cause accident or personal
injury.
CAUTION:
waist belt. Dropping the pin nailer, which is caused
by the hook accidentally coming out of place, may
cause unintentional firing and result in personal
injuries.
Fig.14
9 ENGLISH
4
When installing the hook, always
Use the hanging/mounting parts
Do not hang the hook from the
2
1