Led Indicator Guide - Rssi Mode - Honeywell HW-TG7FS-V Installation And Operating Manual

LED Indicator Guide – RSSI Mode
RSSI Value LED's Lighted
NO SVC LED 5 = slow flash, LEDs 4-2 = off
1 LED 5 = on, LEDs 4-2 = off
1½ LED 5 = on, LED 4 = slow flash
LEDs 3-2 = off
2 LEDs 5-4 = on, LEDs 3-2 = off
2½ LEDs 5-4 = on, LED 3 = slow flash
LED 2 = off
3 LEDs 5-3 = on, LED 2 = off
3½ LEDs 5-3 = on, LED 2 = slow flash
4 LEDs 5-2 = on
Note: When LED 1 is on in RSSI mode, it indicates more than one cellular tower within range.
LS10265-000HW-E:D 06/03/2021
RF dBm
n/a
≤ -111
 -110
 -100 (Minimum signal strength required when
Telco is involved)
 -90 (Minimum signal strength when used as a Sole
Path)
 -80
 -70
 -60
26
56052901 – Rev B