Black & Decker BFLW27MW Instruction Manual page 29

ENGLISH
INSTALLATION INSTRUCTIONS
Floor Drain
A siphon break kit can be purchased separately from your local hardware store to
drain the water to the floor. The siphon break must be a minimum of 28" (710 mm)
from the bottom of the washer.
INSTALLATION CLEARANCES
The location must be large enough to allow the washer door to be fully opened. The
door opens more than 90° and it is not reversible.
Additional spacing of approximately 1" (25mm) on all sides of the washer is
recommended to reduce noise and vibration.
CLEARANCE REQUIRED FOR BUILT-IN APPLICATION
Location and clearance should be considered for ease of installation and servicing.
Page 29