Black & Decker BFLW27MW Instruction Manual page 10

ENGLISH
SET UP & USE
TO CHANGE DEFAULT SETTINGS ON THE LED DISPLAY
The default settings will be illuminated on the control panel.
To change the default temperature, press the Temp button on the control panel
repeatedly to scroll through the selections.
To change the spin speed, press Spin button on the control panel repeatedly to scroll
through the selections.
To change the Soil level, press the Soil button on the control panel repeatedly to
scroll through the selections.
NOTE: Not all options are available for each cycle. Please note cycle chart.
3. Time Display
Indicates remaining cycle time, delay start time and error codes. For each cycle
time the display will show the remaining time counting down until it reaches 0:00
indicating the end of the cycle.
4. Time Save
Decreases wash time. When selected, the new cycle time and the symbol will
illuminate on the time display. The amount of time saved, depends on the wash cycle.
5. Delay
To delay the start of your washer up to 24 hours, press the Delay button to activate
after the wash cycles have been selected. The number shown on the digital display
will indicate when the wash cycle will start. 1 hour will be added to the start time
each time you press the Delay button up to 24 hours. Once the delay time has been
selected, press Start/Pause to activate.
Pressing the Delay button to exceed 24 hours until the display indicates 0H will
deactivate the delay function and the display will turn off.
To cancel the Delay Start function after the wash program has started, press On/Off.
NOTE: In case of disruption of power supply while operating the program, Press
Start/Pause to resume.
Page 10