Black & Decker BFLW27MW Instruction Manual page 11

SET UP & USE
6. Temp
Press Temp continuously to scroll through the selections: Hot+, Hot, Warm, Eco, Cold.
The selected temperature will be illuminated on the LED Display.
7. Spin
Press Spin continuously to scroll through the selections: Highest, High, Med, Low, No
Spin. The selected spin speed will be illuminated on the LED Display.
8. Soil
Press Soil continuously to scroll through the selections: Heavy (For heavily soiled
clothes), Med, Light. The selected soil level will be illuminated on the LED Display.
9. Mute
Press the Soil button 3 seconds to mute the buzzer at the end of the cycle. Press
again for 3 seconds to unmute the buzzer.
10. Function
Press the Function button continuously to select Prewash, Easy Iron, Extra Rinse
functions. The corresponding symbol will illuminate on the LED display to indicate
which functions are activated.
Prewash cycle
Rinses heavily soiled clothes before the main wash cycle.
Easy Iron
After the spin cycle, the tub rotates to prevent clothes from sticking to the side of the
tub to prevent wrinkles and creasing.
Extra Rinse
Add extra rinse time.
11. Child Lock
Use this option to disable the controls except for the ON/OFF. This feature can
prevent children from changing cycles. The washer can only be locked during a cycle.
To activate this function after starting the washer, press and hold the Delay and Temp
buttons at the same time for 3 seconds. There will be an audible sound and the child
lock indicator light will turn on. To cancel this function select the Temp and Program
buttons again.
12. Press START/PAUSE to start a cycle after all settings are programmed.
Press START/PAUSE to pause a cycle and to add a garment.
Press START/PAUSE for 3 seconds to pause the washer.
To add a Garment
A garment can be added to the load in the beginning of a cycle. Press START/PAUSE,
then open the door. Add the item, close the door, and then press the START/PAUSE
button again to resume the cycle.
NOTE: A garment can be added when the water level reaches just below the door.
Once the water level becomes elevated, the door will not open and should not be
forced.
CAUTION: Do not attempt this function when there is hot water in the tub. The
door will not open and should not be forced. Attempting to force the
door to open could cause damage to the unit.
ENGLISH
Page 11