Transporting The Machine - Black & Decker BFLW27MW Instruction Manual

ENGLISH
INSTALLATION INSTRUCTIONS

TRANSPORTING THE MACHINE

1. Transport bolts need to be reinstalled to the machine prior to moving
to avoid damage to the unit.
2. Accumulated water should be drained out of the machine prior to
moving.
3. Handle the machine carefully. The door can not be used as the handle
while moving the unit.
UNPACKING AND REMOVING SHIPPING
MATERIAL
Remove the packing box and lift the washer up and away from the foam base. Open
the door to remove the accessories.
NOTE: The washer should be unpacked by 2 or more people due to the weight.
Remove the packing box and lift the washer up and away from the foam base.
Open the door to remove the accessories.
Lay the unit down on its side to make sure all the small foam triangular pieces
are removed from the bottom of the unit.
WARNING: Packaging materials can be dangerous to children; Keep all packaging
material (plastic bags, polystyrene, etc.) well out of children's reach.
CAUTION: Do not operate this appliance on the foam base. It should be placed on
a level floor.
Page 24