EC Declaration of Conformity Sound pressure level (L ) : 78 dB (A) Uncertainty (K) : 3 dB (A) Makita declares that the following Machine(s): The noise level under working may exceed 80 dB (A). Designation of Machine: Cordless Metal Cutter Wear ear protection Model No./ Type: DCS551...
Page 3
The technical file in accordance with 2006/42/EC is moving parts. Damaged or entangled cords available from: increase the risk of electric shock. Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use 23.10.2014 of a cord suitable for outdoor use reduces the risk of electric shock.
Page 4
GEB058-4 19. Disconnect the plug from the power source and/or the battery pack from the power tool CORDLESS METAL CUTTER before making any adjustments, changing SAFETY WARNINGS accessories, or storing power tools. Such preventive safety measures reduce the risk of Cutting procedures starting the power tool accidentally.
Page 5
Kickback is the result of tool misuse and/or incorrect be serviced before use. Lower guard may operating procedures or conditions and can be avoided operate sluggishly due to damaged parts, gummy by taking proper precautions as given below. deposits, or a buildup of debris. Maintain a firm grip with both hands on the 18.
Page 6
Use of non-genuine Makita batteries, or batteries that have been altered, may result in the battery bursting causing fires, personal injury and damage. It will also void the Makita warranty for the Makita tool and charger. Tips for maintaining maximum battery life Charge...
NEVER use the tool if it runs when you simply pull the switch trigger without pressing the lock-off lever. Return tool to a MAKITA service center for proper repairs BEFORE further usage. NEVER tape down or defeat purpose and function •...
Page 8
Automatic speed change function CAUTION: Before installing the battery cartridge into the tool, • 1. Mode indicator always check to see that the switch trigger actuates properly and returns to the "OFF" position when released. Do not pull the switch trigger hard without pressing •...
Page 9
2. Cutting line Be sure the blade is installed with teeth pointing • 3. Base up at the front of the tool. Use only the Makita wrench to install or remove • the blade. 1. Shaft lock 2. Hex wrench...
To remove the blade, press the shaft lock so that the OPERATION blade cannot revolve and use the hex wrench to loosen the hex bolt counterclockwise. Then remove the hex bolt, outer flange and blade. CAUTION: Always insert the battery cartridge all the way until •...
Only use accessory or (Guide rule) attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Carbide-tipped blades • Rip fence (Guide rule) • Thumb screw M5 x 20 •...