Makita DRS780 Instruction Manual page 10

1
► 1. Shaft lock 2. Wrench
For tool without the ring
1
2
3
4
► 1. Hex bolt 2. Outer flange 3. Circular saw blade
4. Inner flange
For tool with the ring
2
► 1. Hex bolt 2. Outer flange 3. Circular saw blade
To install the circular saw blade, follow the removal
procedure in reverse.
For tool with the inner flange for a
15.88 mm hole-diameter saw blade
(country specific)
Mount the inner flange with its recessed side facing
outward onto the mounting shaft and then place saw
blade (with the ring attached if needed), outer flange
and hex bolt.
For tool without the ring
► 1. Mounting shaft 2. Inner flange 3. Circular saw
10 ENGLISH
1
2
3
4. Ring 5. Inner flange
1 2
blade 4. Outer flange 5. Hex bolt
4
5
5
4
3