If you want to...
Change the phone display
brightness
Change the length of time
for the screen to display
Change the LED indication
for service coverage
Change the language on
your phone screen
Change the font size
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G User Guide for Cisco Unified Communications Manager
FCS REVIEW DRAFT - CISCO CONFIDENTIAL
Then...
1. Choose
2. Highlight Display Brightness
3. Press
to increase the brightness or
4. Press Save to make the change or Cancel.
1. Choose
2. Highlight Display Timeout
3. Select one of the following:
• 10 Seconds
• 30 Second (default setting)
• 1 Minute
• 2 Minutes
4. Press Save to make the change or Cancel.
Note
When the display setting time expires, the screen dims for 10
seconds, then goes dark.
1. Choose
2. Highlight LED Coverage Indicator
3. Select one of the following:
• Enable (default setting)
• Disable
4. Press Save to make the change or Cancel.
1. Log in to your User Options web pages. (See
Options Web Pages, page
2. Change the language setting.
1. Choose
2. Highlight Font Size
3. Select one of the following:
• Default (default setting)
• Increased
4. Press Save to make the change or Cancel.
> Phone Settings > Display Settings.
then press
,
> Phone Settings > Display Settings.
then press
,
> Phone Settings > Display Settings.
then press
,
94.)
> Phone Settings > Display Settings.
then press
or Change.
,
Changing Phone Settings
or Change.
to decrease the brightness.
or Change.
or Change.
Accessing Your User