Securing The Phone With A Lock Set And Cable Lock - Cisco 7920 Series User Manual

Securing the Phone with a Lock Set and Cable Lock

You can secure the phone to a desk top by ordering the lock set from Cisco. For more information,
refer to the Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Accessory
To install the lock set, use the diagram and follow these steps:
If you want to...
Install the lock set on
the phone
1
The lock set does not include the cable lock.
Note
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G User Guide for Cisco Unified Communications Manager
FCS REVIEW DRAFT - CISCO CONFIDENTIAL
Then...
1. Put the security cable around a post or through a hole in the desktop.
Insert the loops at the ends of the security cable through the C-ring.
2. Insert the C-ring with cable loops through the slot on back of phone.
3. Use the combination lock to secure the ends of the C-ring around cable
loops and phone.
The phone is secured to the desktop area.
2
3
Connecting Your Phone
Guide.