IP telephony network. A rechargeable Lithium ion battery powers the Cisco Unified Wireless IP Phone. Before you can use your phone, you must install the battery in the phone and charge the battery. Depending on the type of battery you have, the fully charged battery provides the following hours of service: •...
Push locking catch to the left to release the cover. b) Lift and remove the cover of the battery compartment. Step 2 To install the battery, follow the steps in the following figure. Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G User Guide...
Page 3
Press the battery into the battery compartment until it locks into place. Make sure that it lines up with the phone. Step 3 To replace the phone cover, follow the steps in the following figure. Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G User Guide...
Phone Battery Charging You can charge the battery in your Cisco Unified Wireless IP Phone by connecting the AC power supply or the USB cable to your phone. The following table shows the charging time, depending on the charging method selected.
Page 5
For more information, ask your system administrator. To charge the battery in the phone using the AC power supply, the following figure shows the steps. Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G User Guide...
Page 6
If the Found New Hardware Wizard opens, a) Click Next to use the wizard dialog box. b) In the Update New Software dialog, click No, not this time, and click Next. Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G User Guide...
Step 2 You might need to enter a username and password to access the wireless network. After completing authentication and registration with Cisco Unified Communications Manager, the phone displays the main screen and is ready to place or receive calls.
Press << once to delete the last character or number. To delete the whole character string, press and hold <<. Enter a space Press to enter a space between characters. Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G User Guide...
Accessories that are available for your phone include the following: • Standard and extended batteries • AC power supplies for different geographical areas • Desktop charger • Multicharger • Carrying cases • Headsets • Lock sets Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G User Guide...
Beyond the physical, mechanical, and technical performance, the audio portion of a headset must sound good to you (the user) and to the party on the far end. Sound is subjective and Cisco cannot guarantee the performance of any headsets, but some of the headsets on the sites listed below have been reported to perform well on Cisco Unified IP Phones.
Page 11
Secure Phone with Lock Set and Cable Lock You can secure the phone to a desktop by ordering the lock set from Cisco. For more information, see the Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Accessory Guide.
Page 12
Phone Installation Secure Phone with Lock Set and Cable Lock Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G User Guide...