Utility/Shotbox Control Block - Sony XKS-C9111 User Manual

Button name Description
. (period) • Enters the decimal point.
• Enters "00" in timecode input
mode.
• Used for searching for empty
registers in effect operation
mode, snapshot operation mode,
and shotbox operation mode.
+/− • Inverts the sign (plus and minus)
EFF DISS (effect
• Used to add effect dissolve
dissolve)
attributes in snapshot operation
mode and effect operation mode.
CLR (clear) • Clear an entered numeric value.
AUTO TRANS (auto
• Used when adding an auto
transition)
transition attribute in snapshot
operation mode.
TRIM When entering the difference from
GPI ENBL (GPI the current value, enter a numeric
enable) value and then press the [TRIM]
button.

Utility/Shotbox Control Block

You use the utility/shotbox control block for executing
functions assigned to memory recall buttons, editing and
b Keyframe control
buttons
a Mode selection buttons
These buttons select the operation mode of the utility/
shotbox control block. Press a mode selection button to
change the memory recall buttons to the display for the
selected operation mode.
You can change the assignment of mode selection buttons
in the Setup menu.
Button name
ENTER
Note
The [GPI ENBL] button function is not supported.
The numeric keypad buttons on the numeric keypad
control block are also used when entering numeric values
in conjunction with other operations, such as setting
parameters using the device control block (trackball), or
keyframe editing and setting the transition rate on the
utility/shotbox control block. While setting an item, the
item and the numeric value appear on the display.
executing keyframe effects, editing macros, and display
the transition rate.
a Mode selection buttons
For details, see "Setting Utility/Shotbox Control Block
Button Assignments" (page 412).
45
Description
Confirms an entered value or
selected attribute.
c Memory recall
buttons