Advertisement
and then carefully apply a rust preventative lubricant before refitting
the blade protector. The manufacturer recommends you to use a
rust-preventative lubricant spray to apply an even distribution and
reduce the risk of personal injury from contact with the blades. For
information about suitable spray product, check with an authorised
service centre.
Lubricate the blades lightly before use if necessary using the above
method.
Check all nuts, bolts, and screws at frequent intervals for proper
tightness to ensure the product is in safe working condition. Any
part that is damaged should be properly repaired or replaced by an
authorised service centre.
RESIDUAL RISKS
Even when the product is used as prescribed, it is still impossible
to completely eliminate certain residual risk factors. The following
hazards may arise in use and the operator should pay special
attention to avoid the following:
■
Injury caused by the blade. The blade cannot be guarded while
cutting. Keep the blade away from yourself and others. Cover it
with the blade protector when the product is not in use.
■
Injury caused by vibration. Always use the right tool for the
job, use designated handles, and restrict working time and
exposure.
■
Hearing injury caused by exposure to noise. Wear ear protection
and limit exposure.
RISK REDUCTION
It has been reported that vibrations from handheld tools may
contribute to a condition called Raynaud's Syndrome. Symptoms
may include tingling, numbness, and blanching of the fingers,
usually apparent upon exposure to cold. Hereditary factors,
exposure to cold and dampness, diet, smoking and work practices
are all thought to contribute to the development of the these
symptoms. There are measures that can be taken by the operator
to possibly reduce the effects of vibration:
■
Keep your body warm in cold weather. When operating the unit,
wear gloves to keep the hands and wrists warm. It is reported
that cold weather is a major factor contributing to Raynaud's
Syndrome.
■
After each period of operation, exercise to increase blood
circulation.
■
Take frequent work breaks. Limit the amount of exposure per
day.
If you experience any of the symptoms of this condition, immediately
discontinue use and see your doctor.
WARNING! Injuries may be caused, or aggravated, by
prolonged use of the product. When using any tool for prolonged
periods, ensure you take regular breaks
SYMBOLS
Safety alert
Please read the instructions carefully before
starting the product.
Wear ear protection.
22
Wear eye protection.
Do not expose to rain or damp condition.
Always hold the hedge trimmer with both hands
when operating.
Wear non-slip, heavy duty gloves.
Remove the battery pack before starting any work
on the product.
The guaranteed sound power level shown on this
92
label is 92 dB.
Beware of thrown or flying objects. Keep all
bystanders, especially children and pets, at least
15m away from the operating area.
To prevent serious injury, do not touch cutting
blades.
Regulatory Compliance Mark (RCM). Product
meets applicable regulatory requirements.
Do not dispose of electric tools together with
household waste material. Electric tools and
electronic equipment that have reached the end of
their life must be collected separately and returned
to an environmentally compatible recycling facility.
Check with your local authority or retailer for
recycling advice and collection point.
The following signal words and meanings are intended to explain
the levels of risk associated with this product.
DANGER
Indicates an imminently hazardous situation, which, if not
avoided, will result in death or serious injury.
WARNING
Indicates a potentially hazardous situation, which, if not
avoided, could result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation, which, if not
avoided, may result in minor or moderate injury.
CAUTION
Without safety alert symbol
Indicates a situation that may result in property damage.
22
Advertisement
