Panasonic KX-NCP0158 Quick Installation Manual page 33

•
When planning the location of CS
within the area where the radio signal strength level of CS
b.
Make sure that the radio signal strength level is greater than "3" at any location in the service area
required by the user.
Note
•
If a channel is set, the results of measurement for the 24 slots on the channel are saved each time.
If the same channel is set, the new results override the previous ones. Therefore, a measurement
of 5 channels ´ 24 slots in total can be made.
•
If correct results cannot be obtained (e.g., there are many frame errors), change the location of the
CS and repeat the site survey to select the best location.
Document Version 2009-06
5 Site Survey Using the KX-TD7685/KX-TD7695/KX-TD7696
, make sure that CSs and (clock signal sources) are
is "5".
Quick Installation Guide 33