Makita DCL180Z Instruction Manual page 6

Connect prefilter. At this time, make sure to twist prefilter
so that securing lip is firmly locked into cleaner unit.
1
009999
010000
Connect capsule. Align O symbol on capsule with O
symbol on handle and then firmly twist capsule in
direction of arrow until it is secured.
1
010001
010002
NOTE:
Always remove dust ahead of time, as suction power
•
will be reduced if there is too much dust in cleaner.
Always be sure to check that both filter and prefilter
•
are loaded correctly prior to using cleaner. If they
are not loaded correctly, dust will get into the motor
housing, and cause motor failure.
If the following examples occur, filter and prefilter
are not loaded correctly. Reload them correctly to
rectify problem.
1. Prefilter
1. Mark
1. Handle
1
2. Capsule
2
Problem Examples
Example 1: Only prefilter has been loaded (no filter)
010003
Example 2: Only filter has been loaded (no prefilter)
1
010004
Example 3: Filter has been loaded in a peeled back state
1
010005
Example 4: Prefilter's securing lip is not firmly locked into
groove of cleaner housing
1
2
010006
6
1. Prefilter
1
1. Filter
1. Filter
1. Groove of
3
cleaner housing
2. Prefilter
3. Securing lip