g
Move the cursor to the right.
When there is an unfixed character string with the
cursor at the right end, tap to enter the same
character as the one at the end (Except for
Handwriting input).
h
Enter spaces.
In Kana mode, highlight and select word in the
candidate list.
i
Enter a line feed.
*
Appears before fixing character and fixes the
character.
* In some screens,
(Done)", "
(Go)", etc. appear.
実行
j
Return to keypad/QWERTY.
❖ Information
To return to the display before conversion after the
・
conversion is fixed, tap
(associative) candidate (except in handwriting input
mode) etc.
To enlarge the display area, tap
・
list. To display the software keyboard, tap
(Close)].
じる
For Handwriting input, tap an icon at the upper left
・
of entered character to display candidates for the
entered character. Recognized character is displayed
in light blue and characters are displayed at the
bottom of candidate list in different colors by type.
, "
(Next)", "
次へ
完了
displayed in
つながり予測
in the candidate
or [
閉
For Handwriting input, the following operations are
・
available.
- When entering 2 or more characters and tapping
the icon at the upper left,
combine entered 2 characters to 1 character.
- When entering characters, tap
entered characters.
Note the following when you use Handwriting input.
・
- For voiced sound and semi voiced sound mark,
enter in the right upper part of the input screen.
- For punctuation mark and lower case, enter in the
lower part from the center of the input screen.
Character entry with keypad
Flick input
■
Flick up/down/left/right to enter characters
in each column of kana syllabary.
Ex: Entering characters in "
・
You can enter "
left for "
", up for "
に
down for "
".
の
Before Using the Terminal
appears. Tap
to delete
" column
な
" only by tapping. Flick
な
", right for "
" and
ぬ
ね
to
67