Table of Contents
Advertisement
Notes on holding over the
device
Please note the following when holding the
terminal over an IC card reader or NFC
module equipped device.
Bring the
mark close to the device slowly,
･
do not hit it strongly.
Hold the
mark over the device at the
･
center horizontally. If scanning fails even with
it held in front of the center of the scanner,
slightly lift up the terminal, or move it
backwards/forwards or to the left/right.
If there are metal objects between
･
and the other device, scanning may fail.
Putting the terminal into a case or cover may
affect communication. In that case, remove
the case or cover.
mark
mark
Locking Osaifu-Keitai function
Use "NFC/Osaifu-Keitai lock" settings to
restrict the use of Osaifu-Keitai function and
related services.
NFC/Osaifu-Keitai lock is different from screen
･
lock for the terminal, SIM card lock.
From the Home screen,
1
u
[Settings]
[NFC/Osaifu-Keitai settings]
2
[NFC/Osaifu-Keitai lock].
Enter a password
3
When using "NFC/Osaifu-Keitai lock" for
･
the first time, enter a password to set.
Osaifu-Keitai function is locked, and
･
or
is displayed in the status bar.
❖ Information
Note that you cannot cancel "NFC/Osaifu-Keitai lock",
･
if the battery runs out while "NFC/Osaifu-Keitai lock"
is set. Be careful about remaining battery level. If you
cancel "NFC/Osaifu-Keitai lock", charge the terminal
before canceling.
You need to unlock to use Osaifu-Keitai menu while
･
"NFC/Osaifu-Keitai lock" is set.
"NFC/Osaifu-Keitai lock" password is not be deleted
･
even if you reset the terminal.
When unlocking "NFC/Osaifu-Keitai lock", insert the
･
same docomo nano UIM card as the one inserted
when "NFC/Osaifu-Keitai lock" was set, then unlock.
u
[More...].
u
u
[Next].
Apps
107
Advertisement
Table of Contents
