1. Manuals
  2. Brands
  3. AEG Manuals
  4. Dishwasher
  5. FSK52617Z
  6. User manual

AEG FSK52617Z User Manual

Hide thumbs Also See for FSK52617Z:
Table of Contents

Advertisement

Quick Links

Download this manual
FSK52617Z
USER
MANUAL
EN
User Manual
Dishwasher

Advertisement

Table of Contents
loading

Related Manuals for AEG FSK52617Z

Summary of Contents for AEG FSK52617Z

  • Page 1 FSK52617Z User Manual Dishwasher USER MANUAL...

  • Page 2: Table Of Contents

    12. TECHNICAL INFORMATION................. 25 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
  • Page 3 ENGLISH damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety This appliance can be used by children aged from 8 •...

  • Page 4: Safety Instructions

    If the supply cord is damaged, it must be replaced by • the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard. Put the cutlery in the cutlery basket with the sharp •...
  • Page 5 ENGLISH 2.4 Use to be replaced, this must be carried out by our Authorised Service Centre. • Do not put flammable products or • Connect the mains plug to the mains items that are wet with flammable socket only at the end of the products in, near or on the appliance.

  • Page 6: Product Description

    2.7 Disposal printed circuit boards, electronic displays, pressure switches, WARNING! thermostats and sensors, software Risk of injury or suffocation.

  • Page 7: Control Panel

    ENGLISH Upper basket 3.1 Beam-on-Floor The Beam-on-Floor is off when the appliance is The Beam-on-Floor is a light that is deactivated. displayed on the floor below the appliance door. When AirDry is activated • When the programme starts, a red during the drying phase, the light comes on and stays on for the projection on the floor may...

  • Page 8: Programme Selection

    4.3 Indicators Indicator Description Rinse aid indicator. It is on when the rinse aid dispenser needs refilling. Re- fer to "Before first use". Salt indicator. It is on when the salt container needs refilling. Refer to "Be- fore first use".
  • Page 9 ENGLISH 5.4 Programmes overview Pro- Type of load Degree of Programme phases EXTRAS gramme soil Quick • Crockery • Fresh • Wash 50 °C • ExtraPower • Cutlery • Intermediate rinse • GlassCare • Final rinse 45 °C • AirDry •...

  • Page 10: Basic Settings

    Water (l) Energy (kWh) Duration (min) Programme 9.3 - 11.4 0.82 - 0.94 1h 30min 9.1 - 11.1 1.01 - 1.13 2h 40min 9.2 - 11.2 0.96 - 1.08 0.921 /0.936 /240 AUTO Sense 8.2 - 11.2 0.67 - 1.08...
  • Page 11 ENGLISH Number Settings Values Description Latest pro- Enable or disable the automatic selection gramme selec- Off (default) of the most recently used programme and tion options. 1) For more details, refer to the information provided in this chapter. 6.1 The water softener You can change the basic settings in setting mode.
  • Page 12 Regardless of the type of detergent Subsequently, the rinsing of the water used, set the proper water hardness softener that lasts 5 minutes may begin level to keep the salt refill indicator in the same cycle or at the beginning of active.
  • Page 13 ENGLISH 6.3 End sound 6.5 Key tones You can activate an acoustic signal that The buttons on the control panel make a sounds when the programme is click sound when you press them. You completed. can deactivate this sound. Acoustic signals sound also 6.6 Latest programme when a malfunction of the selection...

  • Page 14: Before First Use

    To enter setting mode, press and hold 2. Press OK to enter the setting. • The bar of the ECOMETER simultaneously dedicated to the chosen setting is about 3 seconds. on. The other bars are off. The lights related to the Previous, OK •...

  • Page 15: Daily Use

    ENGLISH 6. Turn the cap of the salt container CAUTION! clockwise to close the salt container. Only use rinse aid designed CAUTION! specifically for dishwashers. Water and salt can come out 1. Press the release button (D) to open of the salt container when the lid (C).
  • Page 16 8.2 How to select and start a 8.4 How to start the AUTO programme using MY TIME Sense program selection bar 1. Press 1. Slide your finger across MY TIME • The light related to the button is selection bar to choose a suitable programme.

  • Page 17: Hints And Tips

    ENGLISH 8.9 The Auto Off function The appliance returns to the programme selection. This function saves energy by switching Make sure that there is the appliance off when it is not detergent in the detergent operating. dispenser before you start a The function comes into operation new programme.
  • Page 18 9.4 Before starting a products can cause damage to the appliance. programme • In areas with hard and very hard water, we recommend to use basic Before you start the selected dishwasher detergent (powder, gel, programme, make sure that: tablets containing no additional •...

  • Page 19: Care And Cleaning

    ENGLISH After the programme is completed, water can still remain on the inside surfaces of the appliance. 10. CARE AND CLEANING When the programme is complete, the WARNING! indicator is off. Before any maintenance other than running the 10.2 Internal cleaning programme Machine Care, deactivate the appliance and •...
  • Page 20 • Do not use abrasive products, abrasive cleaning pads or solvents. 10.5 Cleaning the filters The filter system is made of 3 parts. 5. Make sure that there are no residues of food or soil in or around the edge of the sump.

  • Page 21: Troubleshooting

    ENGLISH 10.6 Cleaning the lower spray 3. To install the spray arm back, press it downwards. We recommend to clean the lower spray arm regularly to prevent soil from clogging the holes. Clogged holes can cause unsatisfactory washing results. 1. To remove the lower spray arm, pull it upwards.
  • Page 22 Problem and alarm code Possible cause and solution You cannot activate the ap- • Make sure that the mains plug is connected to the pliance. mains socket. • Make sure that there is no damaged fuse in the fuse box.
  • Page 23 ENGLISH Problem and alarm code Possible cause and solution The level of water inside the • Switch the appliance off and on. appliance is too high. • Make sure that the filters are clean. The display shows iF1. • Make sure that the outlet hose is installed at the right height above the floor.
  • Page 24 11.1 The product number 1. Press and hold simultaneously code (PNC) for about 3 seconds. The display shows the PNC of your If you contact an Authorised Service appliance. Centre, you need to provide the product 2. To exit the PNC presentation, press number code of your appliance.

  • Page 25: Technical Information

    ENGLISH Problem Possible cause and solution Traces of rust on cutlery. • There is too much salt in the water used for washing. Refer to "The water softener". • Silver and stainless steel cutlery were placed together. Do not put silver and stainless steel items close to- gether.
  • Page 26 Voltage (V) 220 - 240 Electrical connection Frequency (Hz) Water supply pressure Min. / max. bar (MPa) 0.5 (0.05) / 8 (0.8) Water supply max 60 °C Cold water or hot water Capacity Place settings Power consumption Left-on mode (W) Off-mode (W) 0.50...
  • Page 28 www.aeg.com/shop...

Table of Contents