AEG FSK53600Z User Manual
  1. Manuals
  2. Brands
  3. AEG Manuals
  4. Dishwasher
  5. FSK53600Z
  6. User manual

AEG FSK53600Z User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
FSK53600Z
USER
MANUAL
EN
User Manual
Dishwasher

Advertisement

Table of Contents
loading

Related Manuals for AEG FSK53600Z

Summary of Contents for AEG FSK53600Z

  • Page 1 FSK53600Z User Manual Dishwasher USER MANUAL...

  • Page 2: Table Of Contents

    13. TECHNICAL INFORMATION................. 21 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
  • Page 3 ENGLISH manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety This appliance can be used by children aged from 8 •...

  • Page 4: Safety Instructions

    If the supply cord is damaged, it must be replaced by • the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard. Put the cutlery in the cutlery basket with the sharp •...
  • Page 5 ENGLISH • Do not pull the mains cable to disconnect the mains plug from the disconnect the appliance. Always pull mains socket. Contact the Authorised the mains plug. Service Centre to replace the water • This appliance complies with the inlet hose.

  • Page 6: Product Description

    3. PRODUCT DESCRIPTION Upper spray arm Rinse aid dispenser Lower spray arm Detergent dispenser Filters Cutlery basket Rating plate Lower basket Salt container Upper basket Air vent 3.1 Beam-on-Floor The Beam-on-Floor is off when the appliance is The Beam-on-Floor is a light that is deactivated.

  • Page 7: Control Panel

    ENGLISH 4. CONTROL PANEL On/off button TimeSaver button Display XtraDry button Delay button RESET button Programme button (up) Indicators Programme button (down) 4.1 Indicators Indicator Description Rinse aid indicator. It is always off while the programme operates. Salt indicator. It is always off while the programme operates. 5.
  • Page 8 Programme Degree of soil Programme phases Options Type of load • Fresh soil • Wash 60 °C or 65 °C • XtraDry • Crockery and • Rinses cutlery • Normal or light • Wash 45 °C • XtraDry soil •...

  • Page 9: Settings

    ENGLISH 6. SETTINGS 6.1 Programme selection Press and hold RESET until the appliance is in programme selection mode. mode and user mode How to enter user mode When the appliance is in programme selection mode it is possible to set a Make sure the appliance is in programme and to enter the user mode.
  • Page 10 German de- French degrees mmol/l Clarke de- Water softener lev- grees (°dH) (°fH) grees <4 <7 <0.7 < 5 1) Factory setting. 2) Do not use salt at this level. How to deactivate the rinse Regardless of the type of detergent...

  • Page 11: Options

    ENGLISH AirDry is automatically activated with all – = Acoustic signal off. programmes excluding – = Acoustic signal on. applicable). 2. Press to change the setting. To improve the drying performance refer 3. Press on/off to confirm the setting. to the XtraDry option or activate AirDry. 6.5 AirDry CAUTION! If children have access to the...

  • Page 12: Before First Use

    XtraDry is a permanent option for all The display shows the updated programme duration. programmes other than need not to be selected at every cycle. 7.2 TimeSaver In the other programmes the setting of This option increases the pressure and XtraDry is permanent and it is the temperature of the water.

  • Page 13: Daily Use

    ENGLISH 6. Turn the cap of the salt container clockwise to close the salt container. CAUTION! Water and salt can come out of the salt container when CAUTION! you fill it. After you fill the Only use rinse aid salt container, immediately specifically designed for start a programme to dishwashers.
  • Page 14 Starting a programme with delay start 1. Set a programme. 2. Press again and again until the display shows the delay time you want to set (from 1 to 24 hours). The delay indicator comes on. 3. Close the appliance door to start the countdown.

  • Page 15: Hints And Tips

    ENGLISH Cancelling the programme All buttons are inactive except for the on/off button. Press and hold RESET until the appliance 1. Press the on/off button or wait for is in programme selection mode. the Auto Off function to Make sure that there is detergent in the automatically deactivate the detergent dispenser before you start a appliance.

  • Page 16: Care And Cleaning

    • Do not put in the appliance items • The filters are clean and correctly made of wood, horn, aluminium, installed. pewter and copper. • The cap of the salt container is tight. • Do not put in the appliance items that •...
  • Page 17 ENGLISH 7. Reassemble the filters (B) and (C). 8. Put back the filter (B) in the flat filter (A). Turn it clockwise until it locks. 2. Remove the filter (C) out of filter (B). 3. Remove the flat filter (A). 4.

  • Page 18: Troubleshooting

    • If you regularly use short duration • To maintain the performance of your programmes, these can leave appliance at its best, we recommend deposits of grease and limescale to use monthly a specific cleaning inside the appliance. To prevent this, product for dishwashers.
  • Page 19 ENGLISH Problem and alarm code Possible cause and solution The appliance stops and • It is normal. It provides optimal cleaning results and en- starts more times during op- ergy savings. eration. The program lasts too long. • Select the TimeSaver option to shorten the program time.
  • Page 20 Problem Possible cause and solution Poor drying results. • Tableware has been left for too long inside a closed appliance. • There is no rinse aid or the dosage of rinse aid is not enough. Set the rinse aid dispenser to a higher level.

  • Page 21: Technical Information

    ENGLISH Problem Possible cause and solution Limescale deposits on the ta- • The level of salt is low, check the refill indicator. bleware, on the tub and on • The cap of the salt container is loose. • Your tap water is hard. Refer to "The water softener". the inside of the door.
  • Page 22 office.
  • Page 23 ENGLISH...
  • Page 24 www.aeg.com/shop...

Table of Contents