Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Makita DDF482RMJ
Summary of Contents for Makita DDF482RMJ
- Page 1 INSTRUCTION MANUAL Cordless Driver Drill DDF482 Read before use.
-
Page 2: Specifications
EC Declaration of Conformity Intended use For European countries only Makita declares that the following Machine(s): The tool is intended for drilling and screw driving in Designation of Machine: Cordless Driver Drill wood, metal and plastic. -
Page 3: General Power Tool Safety Warnings
your finger on the switch or energising power tools General power tool safety warnings that have the switch on invites accidents. Remove any adjusting key or wrench before WARNING: Read all safety warnings and all turning the power tool on. A wrench or a key left instructions. Failure to follow the warnings and attached to a rotating part of the power tool may instructions may result in electric shock, fire and/or result in personal injury. -
Page 4: Cordless Driver Drill Safety Warnings
terminals together may cause burns or a fire. Do not disassemble battery cartridge. Under abusive conditions, liquid may be If operating time has become excessively ejected from the battery; avoid contact. If con- shorter, stop operating immediately. It may tact accidentally occurs, flush with water. If result in a risk of overheating, possible burns liquid contacts eyes, additionally seek medical and even an explosion. -
Page 5: Installing Or Removing Battery Cartridge
Lithium-ion batteries with a star marking are equipped Installing or removing battery with a protection system. This system automatically cartridge cuts off power to the tool to extend battery life. The tool will automatically stop during operation if the tool and/or battery are placed under one of the following CAUTION: Always switch off the tool before conditions: installing or removing of the battery cartridge. -
Page 6: Reversing Switch Action
Reversing switch action NOTE: Depending on the conditions of use and the ambient temperature, the indication may differ slightly from the actual capacity. Switch action 1. Reversing switch lever CAUTION: Always check the direction of rota- tion before operation. 1. Switch trigger CAUTION: Use the reversing switch only after the tool comes to a complete stop. -
Page 7: Adjusting The Fastening Torque
To change the speed, switch off the tool first. Select Position of Speed Torque Applicable the "2" side for high speed or "1" for low speed but high speed operation torque. Be sure that the speed change lever is set to the change lever correct position before operation. High Heavy load- If the tool speed is coming down extremely during the ing operation... -
Page 8: Installing Hook
Installing hook Screwdriving operation 1. Groove 2. Hook 3. Screw CAUTION: Adjust the adjusting ring to the The hook is convenient for temporarily hanging the tool. proper torque level for your work. This can be installed on either side of the tool. To install CAUTION: Make sure that the driver bit is the hook, insert it into a groove in the tool housing on inserted straight in the screw head, or the screw... -
Page 9: Maintenance
CAUTION: Pressing excessively on the tool will not speed up the drilling. In fact, this excessive pressure will only serve to damage the tip of your drill bit, decrease the tool performance and shorten the service life of the tool. CAUTION: Hold the tool firmly and exert care when the drill bit begins to break through the workpiece. -
Page 10: Optional Accessories
1 minute. Check the tool while running and electric brake operation when releasing the switch trigger. If electric brake is not working well, ask Makita Authorized or Factory Service Centers for repair. To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. - Page 12 Makita Jan-Baptist Vinkstraat 2, 3070, Belgium Makita Corporation Anjo, Aichi, Japan 885434-222 www.makita.com 20150528...