Page 1
ECHNICAL INFORMATION PRODUCT P 1/ 9 Models No. BTL060/ BTL061 Description Cordless Angle Impact Drivers 14.4V/ 18V BTL060 ONCEPT AND MAIN APPLICATIONS Models BTL060 and BTL061 have been developed as advanced models of 6940D. BTL061 Additionally to the same high fastening performance and Dimensions: mm (") compact angle head as Model 6940D, feature soft grip and LED job light for more maneuverability in tight places.
P 2/ 9 tandard equipment Phillips bit 2-45 ....1 Belt clip ......1 Note: The standard equipment for the tool shown above may differ by country. ptional accessories Sockets Battery BL1430 (for BTL060) Fast charger DC18RA Bits Battery BL1830 (for BTL061) Charger DC24SA (for North America only) Socket adapter...
Page 3
Center attachment for 1R045 1R288 Screwdriver magnetizer Removing Steel ball 4.8 [2] LUBRICATION and ADHESIVE APPLICATION Apply Makita grease N. No.2 to the portions designated with the black triangle to protect parts and product from unusual abrasion. (Fig. 1) LUBRICATION Item No. Description...
Page 4
P 4/ 9 epair [3] DISASSEMBLY/ASSEMBLY [3] -1. Angle Head Complete DISASSEMBLING 1) Angle head complete can be removed from Housing simply by unscrewing (+) Hex bolt M5x30. Note: If the overlapping portion of Angle head complete is deformed from abuse or a fall, Angle head complete cannot be removed from Housing by hand.
Page 5
P 5/ 9 epair [3] DISASSEMBLY/ASSEMBLY [3] -2. Bit Holder Section DISASSEMBLING Open the ends of Ring spring 11 using 1R291 while pressing Ring spring 11 with the thumb of the other hand in order not to allow Flat washer 12 and Compression spring 13 to pop out. By lifting up Ring spring 11 carefully as described in Fig.
Page 6
P 6/ 9 epair [3] DISASSEMBLY/ASSEMBLY [3] -3. Hammer Section (cont.) DISASSEMBLING 5) Attach 1R045 and 1R346 to Hammer, and pull Hammer towards 1R346 as illustrated to left in Fig. 10. Then remove Steel ball 4.8 (2 pcs) from Spindle using screwdriver magnetized with 1R288. Hammer section can now be disassembled as illustrated to right in Fig.
Page 7
P 7/ 9 epair [3] DISASSEMBLY/ASSEMBLY [3] -3. Hammer Section (cont.) ASSEMBLING Note 3: Internal gear 69 is reversible when assembled to Housing L Fig. 13 although there is a notch on one of the two protrusions. Note 4: When assembling DC Motor to Gear section, do not force Cushion the pinion gear of DC Motor into Gear section.
P 8/ 9 ircuit diagram Fig. D-1 Color index of lead wires' sheath Black red marking DC Motor Terminal Switch LED Circuit Connector Protective tube iring diagram [1] Assembling LED Circuit to Housing L Fig. D-2 Assemble LED Circuit to Housing L as illustrated below.
Page 9
P 9/ 9 iring diagram [3] Before Connecting Switch to LED Circuit Fig. D-4 Lead wire holder groove Housing L DC Motor Switch Terminal Flag connector Fix Lead wires with Lead wire holder. Do not cross Lead wires under Switch. Note: Be careful not to pinch Lead wires between Switch and the inside wall of Housing L.