Download Print this page

Philips HR1931 User Manual page 6

Hide thumbs Also See for HR1931:

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 4
ENGLISH
8
Before first use
Thoroughly clean all parts before you use the appliance for the first time (see
chapter 'Cleaning').
Note: Make sure all parts are completely dry before you start using the appliance.
Preparing for use
Assembling the juicing unit
1
Attach the pulp outlet to the juicing unit and turn it clockwise until the arrow
(
) points to the 'locked' indication. (Fig. 2)
2
Insert the black juicing screw into the juicing unit (Fig. 3).
Note: The juicing screw is not suitable for preparing sorbet, and the sorbet screw
is not suitable for juicing.
3
Assemble the two parts of the filter (Fig. 4).
4
Place the two-part filter over the juicing screw (Fig. 5).
Tip: Use the black two-part filter for clear juice. If you prefer cloudy juice with
more fibres in it, use the grey two-part filter.
5
Attach the spout to the juicing unit and turn it clockwise until the arrow (
points to the 'locked' indication. (Fig. 6)
6
Place the berry tray on the feeding tube (Fig. 7).
Placing the juicing unit onto the motor unit
1
Place the assembled juicing unit onto the motor unit, with the pulp outlet
fitting into the opening on the motor unit (Fig. 8).
2
Align the projections on the juicing unit with the recesses in the motor unit.
Slide the juicing unit onto the motor unit until it locks into place. (Fig. 9)
3
Press the juicing unit onto the motor unit (1) and then close the locking clamp
(2). (Fig. 10)
Note: If the locking clamp cannot be closed, check if the juicing unit is positioned
properly with the projections on the juicing unit into the recesses of the motor
unit.
4
Slide the pulp container into the motor unit (Fig. 11).
Using the appliance
The appliance only functions if the juicing unit and the pulp outlet are
assembled correctly and the locking clamp is locked properly.
Always unwind the mains cord completely before you switch on the appliance.
1
Wash the fruit and/or vegetables. If necessary, cut them into pieces that fit into
the feeding tube.
Note: Remove stones and thick peels of the fruits you would not eat, for example
from oranges, pomegranates etc.
2
Place a jug or a glass under the spout (Fig. 12).
3
Press the on/off button to switch on the appliance (Fig. 13).
)

Advertisement

loading

This manual is also suitable for:

Hr1932Hr1933Hr1934Hr1932/34Hr1932/31Hr1933/20