Table of Contents
Advertisement
SP6906 RIDGID ESF.qxp_SP6636 12/10/14 9:28 AM Page 15
Maintenance (Continued)
To disinfect the drum:
1. Pour 1 gallon of water and
1 teaspoon of chlorine bleach
into the drum.
2. Let solution stand for 20 minutes,
carefully swishing every few minutes,
making sure to wet all inside surfaces
of the drum.
3. Empty drum after 20 minutes. Rinse
with water until bleach smell is gone.
Allow drum to dry completely before
sealing the motor on the drum.
Cord Maintenance
When vacuuming is complete, unplug the
cord and wrap it around the motor cover.
If the power cord is damaged, it must be
replaced by the manufacturer or their
service agent or by similarly qualified
personnel to reduce the risk of accident.
Storage
Before storing your Vac, the drum should
be emptied and cleaned. The cord should
be wrapped around the unit. The hose
may be stored by wrapping it around the
unit and plugging the open end into one
of the storage locations on the caddy
assembly. The Vac should be stored
indoors.
1.800.561.8187
Casters and Wheels
Should your cart squeak or become hard
to roll, you should place two or three
drops of general purpose oil on each
wheel at the axle. If your casters are
noisy, you may put a drop of oil on the
roller shaft to make them quieter.
Pull
Handle
Frame and Handles
Power
Cord
Your metal handle is painted to prevent
rust, however, liquids and corrosive
debris should be wiped off with a soft
cloth should they come in contact with
the handle.
SAFETY and RELIABILITY, any
other repairs and adjustments
should be performed by Authorized
Service Centers, always using
RIDGID replacement parts.
15
www.
.com
S E
E
H O
A G
O R
S T
Hose Storage
Area
WARNING: To assure product
information@itm.com
Advertisement
Table of Contents
