Table of Contents
Advertisement
24BDL4151T
Note :
Ethernet will be disabled automatically if Wi-Fi is connected to the
network correctly.
4.3.
Bluetooth
1. Go to the Bluetooth settings by selecting "Settings" > "Bluetooth"
> "On".
2. The system scans for and displays the IDs of available Bluetooth
devices within range.
3. Touch the ID of the Bluetooth device to pair with it.
4. Confirm the passkey that appears and touch Pair. On the other
Bluetooth device, accept the identical passkey for pairing.
5. To unpair the Bluetooth device, select "Unpair" on the connected
device you want to unpair.
4.4.
Signage Display
Set up the Signage Display.
4.4.1. General Settings
Configure Signage Display name, ID, logo, boot on source and schedule.
[Signage Display Name]
Set the PD name. The default name is the Ethernet MAC address
with the prefix "PD_". For example, "PD_000b12223398". The
maximum length of the PD name is 36 characters in UTF8 format.
Click on the PD name to rename it.
[Monitor ID]
Monitor ID ranges from 1 to 255 decimal, whereas Monitor Group
ranges from 1 to 254 decimal. The default settings of Monitor ID and
Monitor Group are 1.
[Boot Logo]
Set up the boot logo (boot animation) mode for the device. The
default setting is On.
[Off]
Turn off boot animation.
[On]
Turn on boot animation and use the default logo of PHILIPS.
[User]
Turn on boot animation and use the boot animation file selected
by the user. The name for boot animation file is "bootanimation.
zip".
Click "Choose Boot Animation" and a dialog box will appear for
user to select the boot animation file. The system scans for the
files automatically under the SD card and USB storage.
Introduction of functions:
a.
Option description
File under /data/local/bootanimation/:
Use customized boot animation file which is
copied from SD card or USB
File under /storage/{USB_STORAGE_ID}/:
Use boot animations file under SD card
File under /storage/{SD_STORAGE_ID}/:
Use boot animations file under USB
b.
Save
If you select
or
zip from the SD card or USB to /data/local and set it as boot logo.
c.
Forget
Press the Forget key to delete /data/local bootanimation.zip and
conceal the boot logo.
d.
Cancel
Cancel and close the dialog box.
When the system cannot find any bootanimation.zip file under
external storage (USB, SD) and /data, the file list will be empty. The
"SAVE" and "FORGET" options become gray and user should check
the external storage (USB, SD) to find the correct file. Insert the
external storage device and try again.
If /data/local/bootanimation/ folder is empty, it means that
bootanimation.zip file has not been saved previously. User logo will
not be shown during system power up.
16
, press Save key to save bootanimzation.
Advertisement
Table of Contents
