D-Link DFE-538TX User Manual page 33

11. The "Internet Protocol (TCP/IP) Properties" window appears. Change from
"Obtain an IP address automatically" to "Use the following IP address."
12. Specify your IP address as 192.168.0.1 and your Subnet mask as
255.255.255.0 and click OK. The IP address shown is an example. You can
substitute another IP address as long as it is unique and follows the same format
as the one shown in the example.
Note: Repeat this step for each computer that will be added to this network. Make
sure that the IP address is unique for each computer. The first computer is
computer A and uses the IP address of 192.168.0.1 with Subnet mask of
255.255.255.0. The last number in Computer B's address will be different. No two
devices on the network can have the same IP address.
30