Samsung AG010KSV Series Installation Manual page 53

Option item Input unit
Outdoor unit fan
Individual
speed correction
Unused option Main
Unused option Main
Unused option Main
Unused option Main
Unused option Main
Unused option Main
Unused option Main
Forced fan function
Main
Note1)
Unused option Main
Unused option Main
Unused option Main
Maximum cooling
capacity restriction Main
Note2)
Note1) Forced fan function: Operates fan periodically to prevent show compiling on the fan while the product is
stopped
Note2) Maximum cooling capacity restriction: Limits operation capacity of compressor according to load
NOTE
During option setting, you may press and hold the K1 for 3 seconds to reset the value to previous setting.
If you want to restore the setting to factory default setting, press and hold the K4 for 3 seconds while you are
in the option setting mode.
- If you press and hold the K4 for 3 seconds, setting will be restored to factory default setting but the setting
is not saved. Press and hold the K2 for 3 seconds and when the 7-Segment enters tracking mode, setting
will be saved.
SEG1 SEG2 SEG3 SEG4
0 0
0 6
0 1
0 7 0 0
0 8 0 0
0 9 0 0
1 0 0 0
1 1 0 0
1 2 0 0
1 3 0 0
0 0
1 4
0 1
1 5 0 0
1 6 0 0
1 7 0 0
0 0
1 8
0 1
Function of the option
Factory default
Increase fan speed
Unused option
Unused option
Unused option
Unused option
Unused option
Unused option
Unused option
Enabled (Factory default) During snow accumulation , the
fan may spin even when the unit
Disabled
Unused option
Unused option
Unused option
Enabled
Disabled
Remarks
Increase the outdoor unit fan
speed to maximum value
is not in operation
English
53