Table of Contents
Advertisement
Available languages
Available languages
Tips for maintaining maximum
battery life
Charge the battery cartridge before completely
1.
discharged. Always stop tool operation and
charge the battery cartridge when you notice
less tool power.
Never recharge a fully charged battery car-
2.
tridge. Overcharging shortens the battery
service life.
Charge the battery cartridge with room tem-
3.
perature at 10 °C - 40 °C (50 °F - 104 °F). Let
a hot battery cartridge cool down before
charging it.
4.
Charge the battery cartridge if you do not use
it for a long period (more than six months).
ASSEMBLY
CAUTION:
Always be sure that the machine is
switched off and the battery cartridge is removed
before carrying out any work on the machine.
Installing the front nozzle
1.
Loosen 2 screws with the hex wrench, and then
pull the screws all the way.
1
► 1. Screw
1
2.
Make sure that the Makita logo on the front nozzle
is facing the direction shown in the figure, and then
attach the front nozzle to the machine.
► 1. Front nozzle
3.
Tighten the screws with the hex wrench.
► 1. Screw
Installing the flat nozzle or
extension nozzle
Optional accessory
1.
Attach the adapter pipe to the front nozzle, and
then turn it clockwise to lock it into place.
► 1. Adapter pipe 2. Front nozzle
5 ENGLISH
1
1
1
2
1
Advertisement
Table of Contents
